Opening modes
Left single, right single, double opening on one line, or opposite opening with leaf centers offset about 40 cm.
Cantilever sliding gate system
A complete trackless gate: aluminum leaf, roller carriages, posts, VFD drive and safety devices, engineered to your opening.
What comes in the system
Every CAIMEN cantilever sliding gate ships as a matched set rather than a leaf you must fit with third-party parts. The motor cabinet holds the drive, control board, receiver, hanger wheel assembly, infrared sensors, anti-pinch device and LED display. The gate leaf combines the top and bottom beams, bracing rods on both sides, middle column bases and rear tension rods.
The gantry at the receiving side carries the second set of infrared sensors, anti-pinch bars and the wing clamps that catch the leaf. Remote controls, a control panel, expansion bolts, embedded parts and the manual are included.
- Motor cabinet with drive, controller and carriage
- Gate leaf with 6005-T6 beams and bracing
- Receiving gantry with sensors and guides
- Embedded parts, remotes and installation manual
How the leaf travels without a track
When a remote, push button, loop sensor or LPR camera sends a signal, the motor drives the leaf through a gear and rack. The control system accelerates, runs at constant speed and decelerates before the limit, so the leaf stops without a jolt.
Encoders or limit switches locate the open and closed positions. During closing, infrared beams scan the path and the gate stops or reverses if anything crosses it.
Key figures
Drive
500 W VFD
Soft start and soft stop
Travel speed
18-22 m/min
Adjustable by VFD
Power
110 / 220 V AC
50 or 60 Hz
Operating range
-35 to +70 °C
Depends on motor and configuration
Bottom beam
302 x 213 mm
6005-T6, wall up to 7.0 mm
Top beam
113 x 93 mm
6005-T6, 2-6 mm walls
Max length
28 m
Single leaf, delivered
Max height
4.0 m
Custom
Figures from CAIMEN product documentation. Final values depend on the beam and motor selected for your project.
Options you can specify
Access control
Dry-contact inputs accept LPR, RFID, face or fingerprint readers, keypads, intercoms and phone apps.
Infill and color
Vertical bars, slats, laser-cut panels or a logo plate. Any RAL color in AkzoNobel Interpon powder.
Anti-climb alarm
An infrared anti-climb system sounds a 10-second alarm when someone tries to scale the gate.
Get a drawing for your opening
Send the clear width, the side space available and a photo of the site.
Or email yifei@gmail.com
